More than 360 degree click and rotate

1. 
2. 
3. 

Previous Next

 Cage eyes

The splitter wires are designed to allow light and air circulation, and the 7-pitch inclined base wires allow eggs to easily access the egg collection belt. The cage eyes are split with the eye at the back by the splitter wires. Cage covers run horizontally, making them easy to open and close. The size of the cages is 60 x 60 cm (capacity for 9 chickens). Under the egg wires are connected two twisted armature wires of 3 mm thickness.

  Irrigation system

There are two metal nipples on the PVC pipe that runs along the cage longitudinally from the middle part of the mesh partition side panels. Underneath you pass a V-shaped boat to drain the water straight down, preventing the water from reaching the fertilizer strip. The water coming from the network is sent to the PVC pipes at the appropriate pressure of the tank. There is a water tank on each floor, and our irrigation system uses long-lasting stabilizers with increased permeability.

• Feeding system

Our feeding system is with trolley system which is the ideal and preferred method in the poultry sector. Where the feed is delivered to the feed ponds in an even and healthy manner using the feed dispenser. In addition, it prevents the consumption of excess feed by ensuring safe, equal and rapid distribution. Our feeding system mechanism operates automatically and automatically by motors ranging from 0.75 HP to 1 HP. Our feed buckets are manufactured from galvanized sheet metal with rivets and rivets. The feed is ideally distributed on the feeding trolleys by means of spirals passing through the 127-diameter tubes of the feed silo. Feed feeders mixed in equal quantities are designed to reach every floor without overflowing. Filling is controlled by control switches located at the beginning of the feeding system. To control this system, there are control connections at the end of the incubator and an electrical panel for these connections, which control the distribution of feed.

   Manure cleaning system

The manure is conveyed by the polypropylene (plastic) fertilizer belt, which is located under each floor and runs along the cage, and the manure is transferred to the vacuum tape. Motion is provided in the transmission process by Mators. At the end of each floor there are manure scrapers above the compost tape; The manure is discharged to a manure dump conveyor located at the back end of the cage. A protective curtain is placed at the back of the cage to prevent manure splash contamination. The bearing rollers on the heads are covered with special rubber. First class material is used in control panels used in fertilizer transportation system.